![ha4361-polybag_extralarge HA2361 Nielsen Polybag of hardware](https://www.metroframe.com/wp-content/uploads/2016/12/HA4361-POLYBAG_extralarge.jpg)
NIELSEN POLYBAG OF HARDWARE
The polybag consists of: two omni hangers, 10 spring clips, eight corner angles ( 4 for the top and 4 for the bottom) and two bumpers (not shown). Everything you need to assemble a Nielsen metal frame.
ITEM NO: HA4361 PRICE:$2.00
QTY: ____________
TOTAL __________
ORDER NOW
![omnihanger_extralarge HA43 Omni Hanger](https://www.metroframe.com/wp-content/uploads/2016/12/omnihanger_extralarge-1.jpg)
NIELSEN OMNI HANGER
The standard omni hanger is the most commonly used hanging device. It can be used on all size pictures and is very strong. Omni hangers are Inserted 1/3 of the way down from the top of the frame. The hanger is placed into the groove and moved into position. A screw driver is used to tighten the set screw. This is repeated on the other side.
ITEM NO: HA43 |
PRICE: $.23 |
QTY: ____________
TOTAL __________
ORDER NOW
![ha05-snap-hanger_extralarge HA05 Snap Hanger](https://www.metroframe.com/wp-content/uploads/2016/12/HA05-SNAP-HANGER_extralarge-1.jpg)
NIELSEN SNAP HANGER
The advantage of the snap hanger is that it is easily adjusted. If you are hanging a show of 20 pictures the same size and you want them to all be aligned this would be the easiest way to do so. Rather than changing the picture hook in the wall to adjust the height of the picture, you could merely press down on the snap hanger and move it up or down in the channel. This is not recommended for heavier pictures because it can "slip" and lacks the strength of the standard omni hanger. The hanger can be repositioned by pressing down with your thumb and sliding it up or down in the channel.
ITEM NO: HA05 |
PRICE: $.09 |
QTY: ____________
TOTAL __________
ORDER NOW
![ha09-metal-notched-hanger-wf_extralarge-1 HA09 Notched Hanger](https://www.metroframe.com/wp-content/uploads/2016/12/HA09-Metal-Notched-Hanger-wf_extralarge-1-1.jpg)
NIELSEN NOTCHED HANGER
The notched hanger is for smaller pictures to hang the artwork package on the wall. The advantage is that it is easier to install, eliminating the need for wire. Position the hanger in the middle of the top of the frame. Snap in to the channel (it can easily be snapped out also). The hanger can be adjusted by sliding it in the moulding channel. It is designed to hang from a nail or similar device.
ITEM NO: HA09 |
PRICE: $.23 |
QTY: ____________
TOTAL __________
ORDER NOW
![ha01_extralarge-1 Nielsen Metal Picture Frame Hardware - Spring Clips](https://www.metroframe.com/wp-content/uploads/2016/12/HA01_extralarge-1-1.jpg)
Spring tension clips are used to secure the artwork in the frame. They are inserted between the frame channel and the backing. If the artwork package is "tight" and the clips are hard to insert, bend them flat with your hands. Conversely, if the artwork package is "loose" increase the tension in the clips.
ITEM NO: HA01 |
PRICE: $.07 |
QTY: ____________
TOTAL __________
ORDER NOW
![ha2363-security-hanger_extralarge HA2363 Nielsen Security Hanger](https://www.metroframe.com/wp-content/uploads/2016/12/HA2363-SECURITY-HANGER_extralarge-1.jpg)
NIELSEN SECURITY SYSTEM
This system is designed to prevent theft of artwork. Each package includes everything you need for one metal frame including a special key which is used to remove the framed artwork from the wall. Complete instructions are included.
ITEM NO: HA2363 |
PRICE: $5.52 |
QTY: ____________
TOTAL __________
ORDER NOW